BENRO TRIPODE ALUMINUM VIDEO KIT WITH S PRO HEAD (SINGLE TUBE)
Product ID: 12907
EAN: 6931747313020
- Pan and tilt lock
- 6-step counterweight (0-5), illuminated spirit level
- Two 1/4 "accessory threads to connect monitor arms or audio recorders directly to the head. This allows you to connect accessories without the need for a cage or platform to do so
- The tilt range for the S6 PRO is + 90 / -75 degrees
- 90-degree forward tilt helps with tabletop setups
- Pan and tilt lock
- 6-step counterweight (0-5), illuminated spirit level
- Two 1/4 "accessory threads to connect monitor arms or audio recorders directly to the head. This allows you to connect accessories without the need for a cage or platform to do so
- The tilt range for the S6 PRO is + 90 / -75 degrees
- 90-degree forward tilt helps with tabletop setups
Benro A373F Single Tube Aluminum Tripod with S6Pro Fluid Video Head
Benro's A373F Single Tube Aluminum Tripod features a 75mm bowl and includes a 75mm half ball adapter. It is paired with the S6Pro fluid video head, which has a 65mm flat base that connects directly to the half ball adapter. The head supports loads up to 13.2 lbs. And, thanks to the flat base design with a 3/8 "-16 thread underneath, the head can be moved from the tripod directly to gliders, jibs and other support equipment. The system Versatile has a compact design with 2-stage / 3-section single tube legs and spiked and rubber feet for use on virtually all surfaces. Each tripod leg can be independently adjusted to three positions, allowing you to set it up quickly and efficiently.
The S6Pro head offers 5 + 0 steps of counterweight and continuous pan and tilt drag. There are also independent twist and tilt locks. The tilt range is a wide + 90 / -75 °, and the swivel range is a full 360 °. With the head attached, the tripod reaches a maximum height of 63 ". The minimum height is 11.8", which is an advantageous low height that is not common among most tripods. At this point, you can set up the tripod for low-angle time-lapse shots and other applications.
Some parts of the head are made of magnesium and other parts of aluminum. Virtually the entire head, including its knobs, is made of sturdy yet lightweight metal. A bread stick is included that can be attached to a rosette adapter on the left or right side of the head, for right- or left-handed users. A camera plate is included that can be adjusted forward / backward to allow you to find the optimal balance for your camera. A safety lock on the plate ensures that once mounted, the plate will not come off if you move it too far in either direction. Two camera screws (1/4 "-20 and 3/8" -16) are supplied that can be stored under the camera plate in the head itself, in dedicated slots. For attaching accessories, there is a 1/4 "-20 threaded hole on each side of the head to which you can secure the link arms.
Chamber plate
Camera Plate Features Sliding Balance Plate
1 x 1/4 "-20 male camera mounting screw
1 x 3/8 "-16 male
Security lock yes
Head
Base mount 3/8 "-16 female
Incremental counterweight of 5 steps plus 0
2 x rosette saucepan handle accessories
1 x illuminated bubble level
Accessory mounting 2 x 1/4 "-20 female thread
Base diameter 2.56 "/ 65 mm
Pan Tilt
Pan drag control: continuous
Inclination: continuous
Drag type Liquid
Vertical tilt + 90 ° to -75 °
360 ° pan range
Independent pan lock yes
Independent tilt lock yes
Legs
Flip Lock Leg Lock Type
Leg positions 3 positions
Leg sections 3
Feet Features Rubber, with spikes
Spreader None
general
Load Capacity 13.2 lbs / 5.99 kg
Maximum working height 63 "/ 160.02 cm
Minimum working height 11.8 "/ 29.97 cm
Materials Aluminum, magnesium
Weight 9 lbs / 4.08 kg