BENRO TRIPODE ALUMINUM VIDEO WITH S6 PRO HEAD
Product ID: 12905
EAN: 6931747313075
- S6Pro fluid head
- 6 Kg payload
- 65mm flat base with a 3/8 "-16 thread
- Compatible with 65mm flat base tripods and mounts directly to most sliders, jibs and monopods
- 5 + 0 counterweight steps
- Continuous pan and tilt drag
- Independent tilt and turn locks
- + 90 / -75 ° tilt range
- 360 ° swivel range
- Made of magnesium and aluminum.
- Rosette adapters on the left and right side to fix the included pan bar
- Sliding chamber plate with safety lock
- 1/4 "-20 and 3/8" -16 camera screws included and can be stored in dedicated spaces on top of the head, under the camera plate
- Two 1/4 "-20 tapped holes for accessories
- A573T Tripod
- 75 mm bowl
- Includes a half ball adapter with a 3/8 "-16 screw
- Rubber feet with double tips.
- Built-in mid-level spreader
- Height range 29.5 to 62 "with head attached
- S6Pro fluid head
- 6 Kg payload
- 65mm flat base with a 3/8 "-16 thread
- Compatible with 65mm flat base tripods and mounts directly to most sliders, jibs and monopods
- 5 + 0 counterweight steps
- Continuous pan and tilt drag
- Independent tilt and turn locks
- + 90 / -75 ° tilt range
- 360 ° swivel range
- Made of magnesium and aluminum.
- Rosette adapters on the left and right side to fix the included pan bar
- Sliding chamber plate with safety lock
- 1/4 "-20 and 3/8" -16 camera screws included and can be stored in dedicated spaces on top of the head, under the camera plate
- Two 1/4 "-20 tapped holes for accessories
- A573T Tripod
- 75 mm bowl
- Includes a half ball adapter with a 3/8 "-16 screw
- Rubber feet with double tips.
- Built-in mid-level spreader
- Height range 29.5 to 62 "with head attached
Benro A573T double tube aluminum tripod and S6Pro fluid head
With the S6Pro Fluid Head that provides balanced support for loads up to 13.2 pounds, and the A573T Dual Tube Aluminum Tripod that offers efficient setup / breakdown workflow as well as stable stand, you get an effective solution. for professional applications with most cameras. The tripod features a built-in mid-level spreader and the head provides 5 + 0 steps of counterweight and continuous pan and tilt drag.
The S6Pro head has a flat base with a 3/8 "-16 thread on the bottom, allowing the versatility of moving it from the tripod directly to other camera mounts, such as sliders. The tripod is designed with a bowl of 75mm but includes a Half Ball Adapter with a 3/8 "-16 screw to incorporate the head. The tripod has rubber feet with dual tips underneath for use on virtually any surface.
Combined, the 2-stage tripod and S6Pro head have a height range of 29.5 to 62 ". The tripod is made of aluminum and the head of magnesium and aluminum, including its knobs. The head comes with a panoramic bar that can be Attach to either side. Also offers two 1/4 "-20 threaded holes for attaching swing arms and other accessories.
Chamber plate
Camera Plate Features Sliding Balance Plate
1 x 1/4 "-20 male camera mounting screw
1 x 3/8 "-16 male
Security lock yes
Head
Base mount 3/8 "-16 female
Incremental counterweight of 5 steps plus 0
2 x rosette saucepan handle accessories
1 x illuminated bubble level
Accessory mounting 2 x 1/4 "-20 female thread
Base diameter 2.56 "/ 65 mm
Pan Tilt
Pan drag control: continuous
Inclination: continuous
Drag type Liquid
Vertical tilt + 90 ° to -75 °
360 ° pan range
Independent pan lock yes
Independent tilt lock yes
Legs
Leg Lock Type Twist Lock
Leg sections 3
Feet Features Rubber, with spikes
Medium level spreader (integrated)
general
Load Capacity 13.2 lbs / 5.99 kg
Maximum working height 62 "/ 157.48 cm
Minimum working height 29.5 "/ 74.93 cm
Materials Aluminum, magnesium
Weight 10.3 lbs / 4.67 kg