Catalog
-
SANDISK PRO G-DRIVE SPACE 12TB 490,00€
DJI OM4 SE GRAY 149,00€
-
-
PROFOTO B10X 1995,00€
PROFOTO B10X 3950,00€ -
Supports - Arms
-
KUPO EXTENSION ARM 89 / 230CM KP092 KG092311
KUPO EXTENSION ARM 89 / 230CM KP092 KG092311
Made of lightweight aluminum Can be used as a handheld light or...
47,20€ 59,00€ -20%Reduced price!Made of lightweight aluminum Can be used as a handheld light or microphone Maximum height: 230 cm Raised end of pin on tube has solid pin for better mounting support TVMP adapter on the bottom allows adjustment for baby clasp or junior receiver
-
MANFROTTO 098SHB GIRAFFE SHORT FOR WALL MOUNT
MANFROTTO 098SHB GIRAFFE SHORT FOR WALL MOUNT
Wall anchoring. Telescopic between 79 and 120cm Maximum load of 5Kg....
162,00€ 180,00€ -10%Reduced price!Wall anchoring. Telescopic between 79 and 120cm Maximum load of 5Kg. Weight 2Kg Supplied with 16mm 013 double male spigot 2 telescopic sections. 160 ° vertical and 180 ° horizontal rotation. Minimum extension: 78 cm. Maximum extension: 122 cm.
-
KUPO ADJUSTABLE MAX ARM KCP-101
KUPO ADJUSTABLE MAX ARM KCP-101
It's an adjustable arm that allows you to place a camera, lighting fixture or...
76,00€ 95,00€ -20%Reduced price!It's an adjustable arm that allows you to place a camera, lighting fixture or accessory in any position in a matter of seconds! The Max arm is equipped with special friction discs replaceable by the user, with non-slip rosettes prevent unwanted movement The center adjustable lever handle is able to control and lock all three movements, allowing...
-
KUPO EXTENSION ARM 1 METER KCP240
KUPO EXTENSION ARM 1 METER KCP240
Kupo 40" Extension Grip Arm with Large Handle (Silver) It is a 2 1/2"...
41,60€ 52,00€ -20%Reduced price!Kupo 40" Extension Grip Arm with Large Handle (Silver) It is a 2 1/2" gripper head mounted on the end of a 40" (5/8") diameter steel bar that is thoroughly machined to create a non-rough non-slip surface Rough, non-slip surface Aluminium and steel
-
KUPO GIRAFFE BABY BOOM KCP-641B
KUPO GIRAFFE BABY BOOM KCP-641B
This boom arm can be used for position reflectors, flashes, screams, tungsten...
87,20€ 109,00€ -20%Reduced price!This boom arm can be used for position reflectors, flashes, screams, tungsten lights and muslin backdrops. A chrome-plated steel boom with 5/8" baby pin, is 1.1-2.4m telescopes and holds up to 3kg when fully extended.
-
KUPO ARM BABY BOOM (STEEL)
KUPO ARM BABY BOOM (STEEL)
Kupo BABY BOOM steel can support up to 5 kg, They extend to 240 cm and...
103,20€ 129,00€ -20%Reduced price!Kupo BABY BOOM steel can support up to 5 kg, They extend to 240 cm and mount on any grip head with its base Equipped with a fairy-tale hook to add sandbags as counterweights Chrome plated steel finish. 1 Riser, 2 sections Type of mounting: 5/8" (16 mm) Stud.
-
KUPO KCP-241 HEXAGONAL GRIP ARM 40 "SILVER
KUPO KCP-241 HEXAGONAL GRIP ARM 40 "SILVER
Hexagon baby pin. It features the arm finished with a hexagonal baby pin that...
53,60€ 67,00€ -20%Reduced price!Hexagon baby pin. It features the arm finished with a hexagonal baby pin that is suitable for mounting a light fixture or anything with a baby catcher.
-
KUPO VESA MONITOR MOUNTING KIT
KUPO VESA MONITOR MOUNTING KIT
75 x 75 mm and 100 x 100 mm mounting holes Double Swivel Joint, Ratchet...
55,20€ 69,00€ -20%Reduced price!75 x 75 mm and 100 x 100 mm mounting holes Double Swivel Joint, Ratchet Handle Baby 5/8" Stand Receiver Horizontal or Vertical Mount Monitor
-
MANFROTTO 393 LENS HOLDER FOR MONOPIE
MANFROTTO 393 LENS HOLDER FOR MONOPIE
Developed for the use of large...
265,50€ 295,00€ -10%Reduced price!Developed for the use of large focal length lenses on monopods Friction base allows for clean pan movement Two rubber protectors; for the hand and for the lens Variable height adjustment in 3 steps 1/4'' Screw
-
MANFROTTO MAGIC ARM 143 RC WITH QUICK SHOE
MANFROTTO MAGIC ARM 143 RC WITH QUICK SHOE
Single lock for all 3 axes...
189,75€ 253,00€ -25%Reduced price!Single lock for all 3 axes With quick release shoe Ideal for mounting the camera at the precise angle Fits any 5/8 '' female socket 1/4 '' universal thread
-
PHOTTIX FLASH BAR FTX2
PHOTTIX FLASH BAR FTX2
The flash bar FTX2 allows the mounting of 2 or more flashes when the light of...
40,96€ 45,51€ -10%Reduced price!The flash bar FTX2 allows the mounting of 2 or more flashes when the light of 1 flash is not enough. The FTX2 has a 28cms bar with 3 shoes. With 5/8" connections at the bottom and 1/4" and 3/8" (female), it allows easy assembly and disassembly and then store it in an included cover
-
DJI CRYSTALSKY MONITOR REMOTE CONTROL SUPPORT
DJI CRYSTALSKY MONITOR REMOTE CONTROL SUPPORT
Adapter bracket for CrystalSky monitors For the Inspire and Phantom 4...
92,00€Adapter bracket for CrystalSky monitors For the Inspire and Phantom 4 series For Phantom 3 Professional and Advanced For the Matrice series
-
KUPO ABAZADERA KCP-390 (OFF CAMERA FLASH SPRING CLAMP)
KUPO ABAZADERA KCP-390 (OFF CAMERA FLASH SPRING CLAMP)
Kupo aluminum clamp lightweight and durable Steel ball head for camera...
44,00€ 55,00€ -20%Reduced price!Kupo aluminum clamp lightweight and durable Steel ball head for camera flash light out in a variety of situations. Clamp comes with adjustable aluminum cold shoes It is easy and convenient to attach the clamp to the 5 ~ 40mm plate or tube with strong spring steel equipped inside the clamp. The 16 mm bolt with 3/8'' thread hole...
-
MANFROTTO NANO CLAMP CLAMP 386
MANFROTTO NANO CLAMP CLAMP 386
Highly resistant aluminium clamp High load capacity up to 4 kg Allows...
37,80€ 42,00€ -10%Reduced price!Highly resistant aluminium clamp High load capacity up to 4 kg Allows grip on tube or round pieces Ideal for lighting or microphones
-
BENRO GORAIL GSR140 OF 40CMS.
BENRO GORAIL GSR140 OF 40CMS.
GSR140 GoRail 1 Adds flexibility to your SystemGo tripod Can be...
31,50€ 35,00€ -10%Reduced price!GSR140 GoRail 1 Adds flexibility to your SystemGo tripod Can be combined with GoCoupler 40 cm long Black Compatible with GSC140 Coupler
-
KUPO EXTENSION ARM 40 INCHES
KUPO EXTENSION ARM 40 INCHES
The extension arm is a 2 1/2 grip head mounted on the end of a 40/8 (16 mm)...
36,75€ 49,00€ -25%Reduced price!The extension arm is a 2 1/2 grip head mounted on the end of a 40/8 (16 mm) diameter steel tube. The surface of the pipe is carefully machined to create a rough texture to ensure a non-slip surface The 2-1/2 gripper head consists of a pair of aluminum swivel discs attached to a 5/8 (16 mm) receiver. The discs have four V-shaped jaws of different...
-
MANFROTTO SUPER CLAMP 035
MANFROTTO SUPER CLAMP 035
Ideal clamp for photographic application. Ergonomic lever to securely lock...
30,60€ 34,00€ -10%Reduced price!Ideal clamp for photographic application. Ergonomic lever to securely lock clamping position.
-
KUPO ARTICULATED ARM MINI 5 KCP-103 (MINI VERSION ARM)
KUPO ARTICULATED ARM MINI 5 KCP-103 (MINI VERSION ARM)
This precision handmade articulated KUPO arm is designed for holding...
39,20€ 49,00€ -20%Reduced price!This precision handmade articulated KUPO arm is designed for holding field monitors or accessories The two 1/4" -20 threads at the ends are attached to swivel joints that rotate 360 degrees, plus a cutout in the sleeve surrounding the ball allows the thread to bend 90 degrees. The center elbow rotates 360 degrees for infinite adjustability. In...
-
LITHUFOTO MULTIFUNCTION SUPPORT Y8
LITHUFOTO MULTIFUNCTION SUPPORT Y8
Multi-function stand 1/4 thread screw (3 outlets) Universal flash...
9,00€Multi-function stand 1/4 thread screw (3 outlets) Universal flash shoe (2 inputs) 1/4 screw hole (6 inputs) Connection ports for attaching two or more brackets Size: 203mmX53mmX25mm
-
MANFROTTO VARIABLE ARM WITH QUICK-CHANGE PLATE 244RC
MANFROTTO VARIABLE ARM WITH QUICK-CHANGE PLATE 244RC
Articulated arm with large locking knob, variable friction arm and knob...
188,10€ 209,00€ -10%Reduced price!Articulated arm with large locking knob, variable friction arm and knob locking. Supplied with quick-release plate with secondary locking based on the 200PL-14 camera platen mechanism. Ideal for mounting a camera or video camera exactly at the angle you need. Couples any 5/8'' female socket, works especially well with the Super Clamp 035.
-
LASOLITE EXTENDABLE HANDLE 24-48 CM. FOR EZYBOX HOT SHOE
LASOLITE EXTENDABLE HANDLE 24-48 CM. FOR EZYBOX HOT SHOE
Extendable pole 24-48cm. for use of windows EZYBOX HotShoe by hand raised.
31,00€Extendable pole 24-48cm. for use of windows EZYBOX HotShoe by hand raised.
-
NANGUANG TRIPLE HOOK + EXPANS NG-3W
NANGUANG TRIPLE HOOK + EXPANS NG-3W
Wall bracket set with 3 expansion...
93,96€Wall bracket set with 3 expansion mechanisms complete with chain and counterweight.
-
LASTOLITE ADJUSTABLE BRACKET FOR LL LA1100 REFLECTORS
LASTOLITE ADJUSTABLE BRACKET FOR LL LA1100 REFLECTORS
LASTOLITE 1100 Universal rotating arm For reflectors 50 centimeters -...
86,00€LASTOLITE 1100 Universal rotating arm For reflectors 50 centimeters - 120 centimeters (20 "- 48") This reflector holder can be used for all Lastolite reflectors and bottle caps with all models up to 120 cm.
-
LASTOLITE PANELITE BRACKET 95-180 CM - SUPPORT FOR...
LASTOLITE PANELITE BRACKET 95-180 CM - SUPPORT FOR REFLECTOR LL LA 1107
Light support for Panelite Allows the Panelite to stay in one position...
78,00€Light support for Panelite Allows the Panelite to stay in one position Compact and easy to transport Compatible with Panelite reflectors with a diameter of 95-180 cm
-
KUPO SOPORTE VENTOSA KSC-03 ESPECIAL DEPORTES (SUCTION...
KUPO SOPORTE VENTOSA KSC-03 ESPECIAL DEPORTES (SUCTION CUP WITH 3/8" THREAD STUD)
Kupo suction cup KCS 03 offers a light and solid mounting solution for a...
134,40€ 168,00€ -20%Reduced price!Kupo suction cup KCS 03 offers a light and solid mounting solution for a smooth, non-porous surface Each suction cup comes with a 3/8" 5/8" baby pin to allow you to mount small lights or window fixtures , mirrors, automobiles or boats. It can also be used at temperatures from -12°C to 49°C. A 6" suction cup with a 3/8' 6'' x 5/8...
-
KUPO EXTENSION ARM 42/127 CM KP042
KUPO EXTENSION ARM 42/127 CM KP042
Constructed of lightweight aluminum Selected aluminum bracket with...
36,00€ 45,00€ -20%Reduced price!Constructed of lightweight aluminum Selected aluminum bracket with aluminum riser provides good elasticity Welding baby pin is more solid Mold injection knob for long time use 4 sections allowing a stand to extend to a maximum height of 4.2 '
-
KUPO PINZA (CLAMP) KCP-730B (SUPER CLAW)
KUPO PINZA (CLAMP) KCP-730B (SUPER CLAW)
13.2 lb (6.0 kg ) load capacity Aluminum material with attached...
25,60€ 32,00€ -20%Reduced price!13.2 lb (6.0 kg ) load capacity Aluminum material with attached 1/4" -20 and 3/8" rubber studs -16 Female Adapts tube size: 0.51 to 1.37 "(13-35 mm) Adapts flat surface size: 0.19 -0.78 "(5.0-20 mm) Weight 4.58 oz (130 g)
-
MICRO ARM 15CMS FRICTION ARM MANFROTTO (optional clamp)
MICRO ARM 15CMS FRICTION ARM MANFROTTO (optional clamp)
Arm length 15cm Mounting by 1/4' Type Mount Mount (top) 3/8' type...
76,50€ 85,00€ -10%Reduced price!Arm length 15cm Mounting by 1/4' Type Mount Mount (top) 3/8' type mount Material Aluminium + steel Maximum load 3kg Weight 0,315kg
-
LASTOLITE HANDLE WITH EXTENSION 74-232CM LL LS2453
LASTOLITE HANDLE WITH EXTENSION 74-232CM LL LS2453
The upper part of the handle has a standard male connector, which allows the...
104,00€The upper part of the handle has a standard male connector, which allows the Lastolite Ezybox shoe, rocker shoe, rocker spigot, TriFlash mount and TriGrip mount, as well as other accessories to be attached. The non-rotating handles allow you to securely attach accessories.
-
PHOTTIX FLASH BAR FTX3
PHOTTIX FLASH BAR FTX3
The FTX3 flash bar allows the mounting of 2 or more flashes when the light of...
43,52€ 54,40€ -20%Reduced price!The FTX3 flash bar allows the mounting of 2 or more flashes when the light of 1 flash is not enough. The FTX3 has a 39cms bar with 5 shoes. With connections of 5/8" below and also 1/4" and 3/8" (female) allows easy mounting and dismounting and then save it in a cover included
-
NANGUANG BRACKET WITH THREAD CN-E27
NANGUANG BRACKET WITH THREAD CN-E27
Stand for study foot Thread E27 with umbrella holder inlet
11,00€Stand for study foot Thread E27 with umbrella holder inlet
-
LUME CUBE MOUNTING ARM FOR GOPRO
LUME CUBE MOUNTING ARM FOR GOPRO
The Lume Cube dual GoPro mount is a bar that allows you to mount one GoPro...
45,00€The Lume Cube dual GoPro mount is a bar that allows you to mount one GoPro and two Lume Cube lights simultaneously It has a GoPro quick release base in the center to secure your GoPro, and a 1/4" -20 screw on each end for mounting Lume buckets or other accessories. A standard GoPro tip interface on the bottom allows attachment to a diving...
-
UKPRO FLEX GRIP TELESCOPIC ACTION CAM AND GOPRO
UKPRO FLEX GRIP TELESCOPIC ACTION CAM AND GOPRO
Double Pivot and Endless Adjustment Extension Use with 2 cameras (one...
59,95€Double Pivot and Endless Adjustment Extension Use with 2 cameras (one forward and one backward) for filming Simultaneously in two directions Add a video and capture light at night or in the dark Wing nut style knobs for easy camera locking Ergonomic grip texture Stabilizes Video Safety cord included for added safety Dimensions: 7 × 5 × 14...
-
JOBY FLASH CLAMP & LOCKING ARM JB01312- CLAMP/ARM
JOBY FLASH CLAMP & LOCKING ARM JB01312- CLAMP/ARM
Can be placed at any angle Vibration resistant Security locking...
22,62€ 26,61€ -15%Reduced price!Can be placed at any angle Vibration resistant Security locking system Holds Flash, LED Light or Accessories 1/4" -20" Shoe and Screw Brackets
-
ROOF MOUNT MANFROTTO FF3210
ROOF MOUNT MANFROTTO FF3210
Support for ceiling mounting of the rail section of a Bogen rail system....
13,50€ 15,00€ -10%Reduced price!Support for ceiling mounting of the rail section of a Bogen rail system. It is advisable to pre-assemble these brackets on the rails at ground level to ensure proper alignment before screwing into the ceiling.
-
KUPO EXTENSIBLE ARM (ROD) KS 600 (TETHER ARM)
KUPO EXTENSIBLE ARM (ROD) KS 600 (TETHER ARM)
KUPO KS-600 Tether Arm horizontal bar with 3/8" external thread...
124,00€ 155,00€ -20%Reduced price!KUPO KS-600 Tether Arm horizontal bar with 3/8" external thread attachment Possibility of installing two tripod heads , with additional mobile nodes fixings Tethermate is specially designed for professional photographers A portable and temporary plate mounted on the 'Anchored Shot' stand to connect a digital SLR...
-
KUPO KS400 KNEECAP/BALL HEAD WITH/HEX
KUPO KS400 KNEECAP/BALL HEAD WITH/HEX
KUPO SUPER KNUCKLE (CLAMP) WITH BALL HEAD AT EACH END CAN BE LOCKED...
37,60€ 47,00€ -20%Reduced price!KUPO SUPER KNUCKLE (CLAMP) WITH BALL HEAD AT EACH END CAN BE LOCKED WITH A KNOB MADE OF CAST ALUMINIUM C/HEX BABY PIN
-
TRIOPO FOREIGN ARM TYPE CREST(ROOF) OB-32-1
TRIOPO FOREIGN ARM TYPE CREST(ROOF) OB-32-1
The newest studio product: It does not take the place of study room, very...
100,00€ 125,00€ -20%Reduced price!The newest studio product: It does not take the place of study room, very simple to use and without the inconvenience of being triggered by the light support. It can circumvents 360 degrees and is convenient to locate It is suitable for light that the weight is between 2 kg and 8 kg. Largest arm length: 2.5 m
-
KUPO ARTICULATED ARM 10 KCP-102 (ARM VERSION)
KUPO ARTICULATED ARM 10 KCP-102 (ARM VERSION)
This precision handmade articulated KUPO arm is designed for holding...
69,95€ 87,44€ -20%Reduced price!This precision handmade articulated KUPO arm is designed for holding field monitors or accessories The two 1/4" -20 threads at the ends are attached to swivel joints that rotate 360 degrees, plus a cutout in the sleeve surrounding the ball allows the thread to bend 90 degrees. The center elbow rotates 360 degrees for infinite adjustability. In...
-
MANFROTTO L-BRACKET MS050M4-Q5 - L-Schiene Q 5
MANFROTTO L-BRACKET MS050M4-Q5 - L-Schiene Q 5
Combatable with Manfrotto heads. Product weight : 358 g
151,20€ 168,00€ -10%Reduced price!Combatable with Manfrotto heads. Product weight : 358 g
-
ZHIYUN LENS HOLDER FOR CRANIUM
ZHIYUN LENS HOLDER FOR CRANIUM
Lens holder for the Zhiyun-Tech cardan crane To be used with...
10,00€Lens holder for the Zhiyun-Tech cardan crane To be used with Zhiyun-Tech Screw Support Lens (sold separately).
-
UKPRO UKPRO VIDEO KIT FREESTYLER LIGHTING GOPRO
UKPRO UKPRO VIDEO KIT FREESTYLER LIGHTING GOPRO
Ultra wide angle matches GoPro camera lens (camera not included) 200 Lumen...
118,00€Ultra wide angle matches GoPro camera lens (camera not included) 200 Lumen CREE LED 3 m water resistant Double pivot and endless adjustment extension Camera Annex 2 Option Ergonomic textured handle Wing nut style knobs allow for superior leverage and grip by locking the camera into position Dimensions: 10.8 x 5.3 in 1.3 × in
-
MANFROTTO MINI CLAMP CLAMP 171
MANFROTTO MINI CLAMP CLAMP 171
Catches bars up to Ø 35 mm. Weight: 0.16 kg. Maximum weight supported (kg.): 1
14,40€ 16,00€ -10%Reduced price!Catches bars up to Ø 35 mm. Weight: 0.16 kg. Maximum weight supported (kg.): 1
-
BENRO GORAIL 1 60 CM LONG GOPLUS
BENRO GORAIL 1 60 CM LONG GOPLUS
Benro's GoRail adds flexibility to the GoPlus tripod system combined with...
35,10€ 39,00€ -10%Reduced price!Benro's GoRail adds flexibility to the GoPlus tripod system combined with GoCoupler accessories. Compatible with GoPlus System 1 Series. Material: aluminium
-
BENRO ADAPTOR GOCOUPLER 1 1/4" & 3/8" GOPLUS
BENRO ADAPTOR GOCOUPLER 1 1/4" & 3/8" GOPLUS
The Benro GoCoupler allows the mounting of an additional ball joint or other...
40,50€ 45,00€ -10%Reduced price!The Benro GoCoupler allows the mounting of an additional ball joint or other GoPlus system accessories to the central column. This feature makes it ideal for multi-camera work or for turning your GoPlus tripod into a workstation. GoCoupler 2 is compatible with GoPlus Series 2 tripods
-
BENRO ADAPTER 90º GOCOUPLER 1 GOPLUS
BENRO ADAPTER 90º GOCOUPLER 1 GOPLUS
Allows a GoRail to be mounted at the end of the central column Up to 90°...
44,10€ 49,00€ -10%Reduced price!Allows a GoRail to be mounted at the end of the central column Up to 90° inclination Compatible with GoPlus System Series 1
-
KUPO SUPERVISER GRIPPER 3.5 "(9 CM) CENTER JAW
KUPO SUPERVISER GRIPPER 3.5 "(9 CM) CENTER JAW
The Center Jaw Super Viser Clamp features a fixed baby bolt rather than a...
49,60€ 62,00€ -20%Reduced price!Out of stockThe Center Jaw Super Viser Clamp features a fixed baby bolt rather than a fixed baby catcher at the jaw end, offering a different mounting solution than the traditional Super Viser clamp in certain operating conditions. Weight: 0.67 kg (1.48 lbs)
-
MANFROTTO ARM FRICTION ARM 24CM MF244 MINI
MANFROTTO ARM FRICTION ARM 24CM MF244 MINI
MANFROTTO 244 MINI Arm 24...
103,50€ 115,00€ -10%Reduced price!Out of stockMANFROTTO 244 MINI Arm 24 "(9.4") multipurpose friction With ¼ "threads at each end
-
PHOTTIX MULTI BOOM 16"
PHOTTIX MULTI BOOM 16"
In addition to being a versatile multiple flash bracket, the Multi-Boom...
62,10€ 69,00€ -10%Reduced price!Out of stockIn addition to being a versatile multiple flash bracket, the Multi-Boom allows easy tilt of sofftboxes umbrella frame, up to approximately 36" or 90cm in size. the Multi-Boom places the rotating umbrella outside the base of the light box which allows easy access to the tilt and movement handle at full speed without restrictions of the light box, which is...
-
MANFROTTO MAGIC ARM 143N
MANFROTTO MAGIC ARM 143N
Elbow arm, robust and high quality...
107,10€ 119,00€ -10%Reduced price!Out of stockElbow arm, robust and high quality Smart central lever, covers all three main movements Designed in aluminum, up to 3 kg load Excellent combination of reliability and ease of use
-
KUPO SHOOTING PLATFORM SUPPORT KS-300B (TETHERMATE W BABY...
KUPO SHOOTING PLATFORM SUPPORT KS-300B (TETHERMATE W BABY RECEIVER 1/4
Tethermate is the laptop/kupo tablet support solution. It is a portable...
79,20€ 99,00€ -20%Reduced price!Out of stockTethermate is the laptop/kupo tablet support solution. It is a portable plate that can be mounted on a bracket for tethered shooting i.e., with the DSLR connected directly to the mobile device. No dedicated base required , using an adapter under the plate with two 5/8'' (16 mm) baby receivers and 1/4'' and 3/8'' female thread, which can be...
-
MANFROTTO GIRAFFE SUPER BOOM WITH WHEELS (025B)
MANFROTTO GIRAFFE SUPER BOOM WITH WHEELS (025B)
Includes light stand, giraffe, wheels and counterweight Supports payloads...
719,10€ 799,00€ -10%Reduced price!Out of stockIncludes light stand, giraffe, wheels and counterweight Supports payloads up to 5kg Maximum stand height 210cm Features a wheeled base for maneuverability Double reinforced legs for stability and safety
-
MANFROTTO SUCTION CUP WITH FLAT BASE 241FB
MANFROTTO SUCTION CUP WITH FLAT BASE 241FB
Suction cup for light photographic and video equipment, up to 35mm SLR,...
104,40€ 116,00€ -10%Reduced price!Out of stockSuction cup for light photographic and video equipment, up to 35mm SLR, digital cameras and light video cameras. The 60mm diameter disc with 3/8" male thread pitch that is attached to the pump allows you to mount most Manfrotto spherical plain bearings with a weight of 0.62 Kg.
-
MANFROTTO ACCESSORY ARM FOR 4 131DDB SPHERICAL PLAIN...
MANFROTTO ACCESSORY ARM FOR 4 131DDB SPHERICAL PLAIN BEARINGS
Similar to 131D but with 2 brackets on the arm allowing a total of 4...
134,10€ 149,00€ -10%Reduced price!Out of stockSimilar to 131D but with 2 brackets on the arm allowing a total of 4 spherical plain bearings. For models 800, 806, 809, 816 and 816/1.
