BENRO TRIPODE TRAVEL VIDEO ALUMINUM AERO 6 PRO REF. A3883TS6PRO
Product ID: 12915
EAN: 6931747313044
- Pan and tilt lock
- 6-step counterweight (0-5), illuminated spirit level
- Two 1/4 "accessory threads to connect monitor arms or audio recorders directly to the head. This allows you to connect accessories without the need for a cage or platform to do so
- The tilt range for the S6 PRO is + 90 / -75 degrees
- 90-degree forward tilt helps with tabletop setups
- Material: Aluminum Maximum load: 6kg Maximum height with retracted center column: 145.9cm Height: Minimum 34cm - Maximum 184cm Number of sections: 4 Quick plate: QR6PRO Weight: 4.08 kg
- Pan and tilt lock
- 6-step counterweight (0-5), illuminated spirit level
- Two 1/4 "accessory threads to connect monitor arms or audio recorders directly to the head. This allows you to connect accessories without the need for a cage or platform to do so
- The tilt range for the S6 PRO is + 90 / -75 degrees
- 90-degree forward tilt helps with tabletop setups
- Material: Aluminum Maximum load: 6kg Maximum height with retracted center column: 145.9cm Height: Minimum 34cm - Maximum 184cm Number of sections: 4 Quick plate: QR6PRO Weight: 4.08 kg
Benro A3883 Backward Folding Aluminum Travel Tripod with S6Pro Fluid Video Head
The Benro S6Pro Fluid Video Head A3883 Rear Fold Aluminum Travel Tripod features a highly compact travel tripod that can be converted to a monopod, and a compact fluid head with a 65mm flat base that allows you to move the head directly to most sliders, jibs and other support gear. The head supports loads up to 13.2 pounds and offers 5 + 0 steps of counterweight.
The tripod has a center column with a leveling adapter at the end that allows you to adjust the angle of the fluid head without having to readjust the tripod legs. The combination of the back fold design and the center column allows the tripod to have a maximum height of 72 "(with the head attached) while it can be folded down to a very compact size. Additionally, the tripod legs can be extended widely to provide a minimum low angle height of only 13.4 "(also with attached head). With rubber feet and spikes underneath, the tripod can be used on virtually any surface. To make it a monopod, the center column is used as the central component. One of the tripod legs unscrews from the tripod and attaches to the center column, and together the two form a fully functional monopod.
The S6Pro head features continuous pan and tilt drag and has independent pan and tilt locks. The tilt range is a wide + 90 / -75 °, and the swivel range is a full 360 °. Some parts of the head are made of magnesium and other parts of aluminum. Virtually the entire head, including its knobs, is made of sturdy yet lightweight metal.
A bread stick is included that can be attached to a rosette adapter on the left or right side of the head, for right- or left-handed users. A camera plate is included that can be adjusted forward / backward to allow you to find the optimal balance for your camera. A safety lock on the plate ensures that once mounted, the plate will not come off if you move it too far in either direction. Two camera screws (1/4 "-20 and 3/8" -16) are supplied that can be stored under the camera plate in the head itself, in dedicated slots. For attaching accessories, there is a 1/4 "-20 threaded hole on each side of the head to which you can secure the link arms.
S6Pro fluid head
13.2 lb payload
65mm flat base with 3/8 "-16 thread
Can also be mounted directly to most sliders, jibs, and monopods
5 + 0 counterweight steps
Continuous pan and tilt drag
Independent pan and tilt locks
+ 90 / -75 ° tilt range
360 ° swivel range
Made of magnesium and aluminum.
Rosette adapters on the left and right side to attach the included pan bar
Sliding camera plate with safety lock
1/4 "-20 and 3/8" -16 camera screws included and can be stored in dedicated spaces on top of the head, under the camera plate
Two 1/4 "-20 tapped holes for accessories
A3883 Tripod
Backward folding travel tripod with center column and leveling adapter
Convertible into a monopod with one of the tripod legs unscrewed and secured to the center column
72 "maximum height with attached S6Pro
Low angle minimum height of 13.4 "
Rubber feet and spikes
Swivel leg locks
Aluminum construction
Chamber plate
Camera Plate Features Sliding Balance Plate
1 x 1/4 "-20 male camera mounting screw
1 x 3/8 "-16 male
Security lock yes
Head
Base mount 3/8 "-16 female
Incremental counterweight of 5 steps plus 0
2 x rosette saucepan handle accessories
1 x illuminated bubble level
Accessory mounting 2 x 1/4 "-20 female thread
Base diameter 2.56 "/ 65 mm
Pan Tilt
Pan drag control: continuous
Inclination: continuous
Drag type Liquid
Vertical tilt + 90 ° to -75 °
360 ° pan range
Independent pan lock yes
Independent tilt lock yes
Legs
Leg Lock Type Twist Lock
Leg sections 4
Feet Features Rubber, with spikes
Spreader None
Central column
Center Column Features Leveling, 3/8 "-16 Female Accessory Mount
general
Load Capacity 13.2 lbs / 5.99 kg
Maximum working height 72 "/ 182.88 cm
Maximum height without center column 57.4 "/ 145.80 cm
Minimum working height 13.4 "/ 34.04 cm
Materials Aluminum, magnesium
Weight 9 lbs / 4.08 kg