RODE VIDEOMIC PRO RYCOTE RYCOTE LYRE SUSPENSION
Product ID: 10982
EAN: 698813004195
- Transmission quality condenser microphone
- Rycote Lyre Shockmount
- Frequency response from 40 Hz to 20 kHz
- Light
- Less noise and greater sensitivity
- 9V with batteries
- 1/8 "Mini-Jack Output
- Two-step high pass filter
- Three position level control
- Includes camera support
Accessories View all
Rode VideoMic Pro with Rycote Lyre Shockmount
The VideoMic Pro with Rycote Lyre Shockmount by Rode is a supercardioid condenser shotgun microphone that ends in a stereo 1/8 "minijack (double mono), includes a built-in shock absorber and an integrated foam windshield, can be used to capture audio for camcorders, DSLR and portable recorders as primary and reference audio source.
The VideoMic Pro has been updated from previous models with a 1/2 "capacitor capsule that provides transmission quality audio.Its 1/8" stereo mini-jack connector (which sends the mono signal to the left and right channels) ) offers low self-esteem Noise of only 14 dB. A supercardioid polar pattern ensures that the surrounding audio is minimized and its recording focuses on the subject in front of the camera.
In addition, the cushion based on Rycote Lyre is constructed from a single piece of resistant thermoplastic. Separates the capsule and electronic components of VideoMic Pro from its support, which provides isolation from external physical factors that can cause unwanted noise and vibration in the microphone. This suspension will never wear out, give way or break
Easily accessible from the back of the microphone are power, filter, level controls and a high-pass filter selectable at 80 Hz. The filter will prevent low-intensity noise, such as air conditioners and traffic, from being recorded. . In addition, the -10 dB (or pad) is suitable when recording high sound sources such as live music, motor sports or interviews, where the subject is very close to the camera. There is a +20 dB level increase designed for use with DSLR cameras, so the user can reduce the level of the camera's preamplifier, effectively reducing the amount of noise generated by the camera's audio circuits.
The Rode VideoMic Pro uses a standard size shoe for use in the camera and features a 3/8 "thread on the base of the stand for easy bar bar mounting.The VideoMic Pro runs on batteries and offers more than 70 hours Recording from a single 9V battery.
9V battery with more than 70 hours of use (alkaline)
Mounting of camera shoe with 3/8 "thread for easy assembly on boom bar
The compact form factor is only 6.7 "long
10-year limited warranty with online registration
Line Gradient Condenser
Directional Pattern Supercardioid
Frequency Response 40 Hz - 20 kHz (selectable HPF @80 Hz)
Sensitivity -32 dB re 1 V/Pa (20 mV @ 94 dB SPL) ± 2 dB @ 1 kHz
Output Impedance 200 Ohms
Equivalent Noise 14 dB
Maximum Output +6.9 dBu (@ 1% THD into 1 kOhms)
Dynamic Range 120 dB (as per IEC 651)
Maximum SPL 134 dB (@ 1 kHz, 1% THD into 1 kOhms load)
Signal-to-Noise Ratio 80 dB
Battery Type 1 x 9 V alkaline battery (current 7.8 mA)
Level Control Three-position (-10 dB, 0, +20 dB)
High Pass Filter Two-step (flat, 80 Hz)
Output Connectors 1 x 1/8" (3.5 mm) stereo mini-jack (dual mono)
Low Frequency Roll-Off 80 Hz High Pass Filter
Dimensions (HxWxL) 2.95 x 3.93 x 6.69" (75 x 100 x 170 mm)
Weight 3 oz (85g)