RODE FILMMAKER WIRELESS KIT P/AUDIO IN DIGITAL CAMERA
Product ID: 10485
EAN: 698813004331
Discount of 39 EUROS for Canary Islands
- Includes transmitter, receiver, Lav Mic
- Series II 2.4 GHz Digital transmission
- 128-bit encrypted signal
- 24-bit lossless transmission/44.1 KHz
- Reach up to 328 feet
- A touch of pairing
- Digital OLED Display
- 3-Level gain Control
- USB and AA Batteries
- Use up to 8 systems simultaneously
Discount of 39 EUROS for Canary Islands
- Includes transmitter, receiver, Lav Mic
- Series II 2.4 GHz Digital transmission
- 128-bit encrypted signal
- 24-bit lossless transmission/44.1 KHz
- Reach up to 328 feet
- A touch of pairing
- Digital OLED Display
- 3-Level gain Control
- USB and AA Batteries
- Use up to 8 systems simultaneously
Accessories View all
Rode RodeLink Wireless Filmmaker Kit
The Rode RodeLink Filmmaker Kit is a wireless system for film and video production that features a transmitter, receiver and lavalier microphone included. The system uses a 128 GHz series II 128 GHz encrypted digital transmission signal that continuously monitors and jumps between frequencies to select the strongest signal. The kit offers high signal-to-noise ratio and offers high-resolution 24-bit, 44.1 kHz digital audio transmission in a range of up to 328 feet. Up to 8 systems can be used together simultaneously.
The Belt Pack transmitter features a simple 3-stage gain adjustment and a mute lock function to prevent accidental muting. A 3.5 mm lock input audio connector ensures that the microphones used in the body remain secure. The camera mounting receiver has a removable shoe support that allows for use on the camera or as a belt-pack receiver. The Mute Override feature provides full control to the operator, while the mute state, input level, and battery status for the transmitter and receiver are displayed on the front of the unit. The receiver also uses the same 3.5 mm lock connector as the transmitter to provide solid security.
Both the belt transmitter and the camera-mounted receiver can be powered by any USB power supply via a standard micro-USB cable. The system offers eight discrete channels that can be easily configured in seconds with more than 8000 combinations of available channels. Channel selection and pairing are achieved with a single keystroke and auto-scan, significantly reducing configuration times compared to traditional UHF configurations.
Transmission type Agile fixed frequency system of 2.4 GHz
Dynamic Range 112 DB
Distance 328 feet (100 m)
Frequency range 35 Hz to 22 kHz
Maximum output Level 1 Vrms (2.8 V, peak-to-peak)
Maximum input sound Level 1 Vrms (2.8 V, peak-to-peak)
Dormant Latency Maximum: 4 ms
Receiver
Power supply 2 x AA batteries and micro-USB
Internal antenna
Output connection 3.5 mm TRS female connector (double mono with screw lock)
Output Impedance 300 ohms
Transmitter
Power supply 2 x AA batteries and micro-USB
Internal antenna
Input connection type 3.5 mm TRS female connector (with screw lock)
Input Impedance 10 kOhms
Lavalier Microphone Specifications
Acoustic principle pressure Gradient
Electronic Active Impedance Converter JFET
Capsule 0.1 "/2.5 mm
Omni Polar pattern
Frequent response 60 Hz to 18 kHz
Output Impedance 3 kOhms
SPL Maximum level 110 DB SPL (@ 1 kHz, 1% THD in 1 ohm load)
Maximum output Level 189 dBu (@ 1 kHz, 1% THD in 1 kOhm)
Sensitivity-33.5 db, 1 V/Pascal (21.00 MV at 94 db SPL) ± 2 db at 1 kHz
Equivalent noise level 25 DB-A (weighted a)
Physical dimensions
Dimensions (H x W x D) Receiver: 4.4 x 2.6 x 2.0 "/11.1 x 6.5 x 5.2 cm Transmitter: 4.4 x 2.6 x 1.6 "/11.1 x 6.5 x 4.0 cm Lavalier: 47.2 x 0.2 x 0.2 "/120.0 x 0.5 x 0.5 cm
Receiver Weight: 6.7 oz/190.0 G transmitter: 6.7 oz/190.0 G Lavalier: 0.04 oz/1.00 g