Product Object
(
[quesabesde] => 0
[descripcion_quesabesde] =>
[ciao] => 1
[descripcion_ciao] => Entrega en 24/48 horas – Tienda en Las Palmas de G.C. desde 1974
[ultimas_unidades] => 0
[promocion_mes] => 0
[dropshipping_only] => 0
[tax_name] => deprecated
[tax_rate] => 0
[id_manufacturer] => 301
[id_supplier] => 0
[id_category_default] => 33
[id_shop_default] => 1
[manufacturer_name] => PEAK DESIGN
[supplier_name] =>
[name] => PEAK DESIGN WRIST CLUTCH CL3
[description] => The Peak Design CL-3 Clutch is a hand strap for the camera that is quickly connected and disconnected to your camera by means of a dyneema anchor and a tension clip. The strap around your hand can be easily adjusted with your non-firing hand to tighten it when you walk and loosen it when you need better access to your controls when shooting.
[description_short] =>
The Peak Design CL-3 Clutch is a hand strap for the camera that is quickly connected and disconnected to your camera by means of a dyneema anchor and a tension clip. The strap around your hand can be easily adjusted with your non-firing hand to tighten it when you walk and loosen it when you need better access to your controls when shooting.
PEAK DESIGN CLUTCH CL3 HANDLE BELT
The Peak Design CL-3 Clutch is a hand strap for the camera that is quickly connected and disconnected to your camera by means of a dyneema anchor and a tension clip. The strap around your hand can be easily adjusted with your non-firing hand to tighten it when you walk and loosen it when you need better access to your controls when shooting.
A quick release plate compatible with the included Arca type attaches to the tripod mount of your camera, and one of the included anchors is attached to the plate. Simply slide the anchor into the link to hold the strap and slide it out to separate it. To attach the upper part of the strap to the top of the camera, a custom designed tension clip acts like a small carabiner. The strap can be adjusted from 7.1 to 11.4 ".
[description_short] => - Fast connection
- Quick adjustment
- It works with or without a battery.
- QR plate compatible with Arca
PEAK DESIGN WRIST CLUTCH CL3
Product ID: 10856
EAN: 818373020743
- Fast connection
- Quick adjustment
- It works with or without a battery.
- QR plate compatible with Arca
- Fast connection
- Quick adjustment
- It works with or without a battery.
- QR plate compatible with Arca
Garantía oficial 3 años.
10856
New product
More info
PEAK DESIGN CLUTCH CL3 HANDLE BELT
The Peak Design CL-3 Clutch is a hand strap for the camera that is quickly connected and disconnected to your camera by means of a dyneema anchor and a tension clip. The strap around your hand can be easily adjusted with your non-firing hand to tighten it when you walk and loosen it when you need better access to your controls when shooting.
A quick release plate compatible with the included Arca type attaches to the tripod mount of your camera, and one of the included anchors is attached to the plate. Simply slide the anchor into the link to hold the strap and slide it out to separate it. To attach the upper part of the strap to the top of the camera, a custom designed tension clip acts like a small carabiner. The strap can be adjusted from 7.1 to 11.4 ".
SPECIFICATIONS
Length of the strap 7.1 to 11.4 "/ 18.0 to 29.0 cm
Belt width 2.0 "/ 5.1 cm
Lug connector 3/8 "
Tripod connector 1/4 "-20 male
Material Rubber
X
Create an account and enjoy the advantages of the PREMIUM client
-
Receive loyalty points equivalent to 1% DISCOUNT on all purchases to be used in future purchases
-
Subscribe to the newsletter and receive news of News and Offers, Coupons discounts and enter Sweepstakes and Promotions (You can unsubscribe at any time)
Selecciona tu zona de entrega
¿Te gustaría configurar como zona de entrega las Islas Canarias?