290 Dual Tripod Kit with 3 way ball joint - Aluminum
The Manfrotto MK290DUA3-3WUS 290 aluminum double tripod with 3-way pan / tilt head features a 90 ° center column for taking table, low-angle or macro photographs. It extends from just 2.2 "above the ground to 69.1" tall. The tripod weighs 5.7 lb and can hold up to 8.8 lb of equipment. Its 3-section legs have adjustable tension locks to individually adjust the height of each leg. Four leg locking angles allow you to place the tripod in a variety of positions. A rubber grip on one of the legs helps carry the tripod, and the rubber feet keep it stable on slippery surfaces.
The included 3-way 804 swivel / tilt head features retractable handles, which decreases the overall size when not in use. A built-in spring helps with the tilt movement of the head by compensating heavier lenses and cameras with off-center loads. A 200LT-PL quick-release plate is included to quickly connect and remove your camera from the head.
Manfrotto MT290DUA3US 290 aluminum double tripod
The Manfrotto MT290DUA3US 290 aluminum double tripod features a 90 ° central column for taking table, low-angle or macro photographs. It extends from just 2.4 "above the ground to 64.9" tall. The tripod weighs 4 lb and can hold up to 11 lb of equipment. Its 3-section legs have adjustable tension locks to individually adjust the height of each leg. Four leg locking angles allow you to place the tripod in a variety of positions. A rubber grip on one of the legs helps carry the tripod, and the rubber feet keep it stable on slippery surfaces.
Manfrotto MH804 3-way tilt and turn head with quick release plate 200LT-PL
This 3-way MH804 Tilt and Turn Head from Manfrotto has a load capacity of 8.8 lbs. And can be connected to tripods or other support systems that have a 3/8 "-16 mount. Includes a quick-release cam Built-in RC2 lock and a quick release plate 200LT-PL. Quick release plates compatible with RC2 such as the 200LT-PL can be removed from the head by pulling on the spring lever of the cam lock, which also allows the plate Replace quickly, it also has a safety lock to prevent the 200LT-PL or other compatible quick-release plate from accidentally disconnecting.
Cameras, sports optics or camcorders that are compatible with a 1/4 "-20 mount can be connected to the quick-release plate before attaching it to the tilt and swivel head. The head can be rotated 360 °, tilted 90 ° forward or 30 ° backward, as well as 90 ° sideways for vertical orientation.Each of these three movements operates independently of each other, has dedicated control handles and can be locked in place.In addition to integrating the ability to individually lock movements By rotating the rubber grip of each corresponding handle, the telescopic control handles for both tilt functions can also be retracted while the head is not in use for more convenient storage or transport.
To promote rapid, repeatable and precise positioning of the device, this 3-way MH804 tilt and swivel head also includes dedicated angle scales for each movement that are designed for easy visibility. For heavier loads, the built-in counterweight springs help ensure smooth and gradual tilt movements back and forth.
[description_short] => 30 EUROS DISCOUNT FOR CANARY ISLANDS
- The central column system at 90º allows shooting with new perspectives
- 4 leg positions
- New rubber heater to improve grip
- The new 804 Adapto 3Way ball joint is ideal for precise framing on all 3 axes
- Excellent Italian Premium Design
MANFROTTO MK290DUA3-3W TRIPOD ALU 3 SECTIONS + MH804-3W LABEL
Product ID: 11443
EAN: 8024221647822
- The central column system at 90º allows shooting with new perspectives
- 4 leg positions
- New rubber heater to improve grip
- The new 804 Adapto 3Way ball joint is ideal for precise framing on all 3 axes
- Excellent Italian Premium Design
Accessories View all
290 Dual Tripod Kit with 3 way ball joint - Aluminum
The Manfrotto MK290DUA3-3WUS 290 aluminum double tripod with 3-way pan / tilt head features a 90 ° center column for taking table, low-angle or macro photographs. It extends from just 2.2 "above the ground to 69.1" tall. The tripod weighs 5.7 lb and can hold up to 8.8 lb of equipment. Its 3-section legs have adjustable tension locks to individually adjust the height of each leg. Four leg locking angles allow you to place the tripod in a variety of positions. A rubber grip on one of the legs helps carry the tripod, and the rubber feet keep it stable on slippery surfaces.
The included 3-way 804 swivel / tilt head features retractable handles, which decreases the overall size when not in use. A built-in spring helps with the tilt movement of the head by compensating heavier lenses and cameras with off-center loads. A 200LT-PL quick-release plate is included to quickly connect and remove your camera from the head.
Manfrotto MT290DUA3US 290 aluminum double tripod
The Manfrotto MT290DUA3US 290 aluminum double tripod features a 90 ° central column for taking table, low-angle or macro photographs. It extends from just 2.4 "above the ground to 64.9" tall. The tripod weighs 4 lb and can hold up to 11 lb of equipment. Its 3-section legs have adjustable tension locks to individually adjust the height of each leg. Four leg locking angles allow you to place the tripod in a variety of positions. A rubber grip on one of the legs helps carry the tripod, and the rubber feet keep it stable on slippery surfaces.
Manfrotto MH804 3-way tilt and turn head with quick release plate 200LT-PL
This 3-way MH804 Tilt and Turn Head from Manfrotto has a load capacity of 8.8 lbs. And can be connected to tripods or other support systems that have a 3/8 "-16 mount. Includes a quick-release cam Built-in RC2 lock and a quick release plate 200LT-PL. Quick release plates compatible with RC2 such as the 200LT-PL can be removed from the head by pulling on the spring lever of the cam lock, which also allows the plate Replace quickly, it also has a safety lock to prevent the 200LT-PL or other compatible quick-release plate from accidentally disconnecting.
Cameras, sports optics or camcorders that are compatible with a 1/4 "-20 mount can be connected to the quick-release plate before attaching it to the tilt and swivel head. The head can be rotated 360 °, tilted 90 ° forward or 30 ° backward, as well as 90 ° sideways for vertical orientation.Each of these three movements operates independently of each other, has dedicated control handles and can be locked in place.In addition to integrating the ability to individually lock movements By rotating the rubber grip of each corresponding handle, the telescopic control handles for both tilt functions can also be retracted while the head is not in use for more convenient storage or transport.
To promote rapid, repeatable and precise positioning of the device, this 3-way MH804 tilt and swivel head also includes dedicated angle scales for each movement that are designed for easy visibility. For heavier loads, the built-in counterweight springs help ensure smooth and gradual tilt movements back and forth.
Maximum working height 165 cm
Minimum height 6 cm
Equipmentclip on clip feet, center column, center column with hook, rubber grip
Load capacity max. 5 kg
Thread Pitch
3-way tilting ball joint
Weight 1,840 g
Aluminum matter
Black color
Folded tripod length63 cm
Max. without central column139 cm
Number of leg sections3
Leg diameter26 mm
Properties different angles of adjustment on the legs, non-slip feet
Leg opening angles 25 °, 46 °, 66 °, 88 °
Number of legs3
Suitable for SLR camera, camcorder
Manfrotto 290 Series
Items included tripod, tripod bag, kneecap
Create an account and enjoy the advantages of the PREMIUM client
-
Receive loyalty points equivalent to 1% DISCOUNT on all purchases to be used in future purchases
-
Subscribe to the newsletter and receive news of News and Offers, Coupons discounts and enter Sweepstakes and Promotions (You can unsubscribe at any time)
Selecciona tu zona de entrega
¿Te gustaría configurar como zona de entrega las Islas Canarias?