100mm NiSi V6 filter holder kit

This 100 mm NiSi V6 filter support kit allows the convenient use of up to three filters 100 mm wide and 2 mm thick available separately together with a circular polarizer included. This kit comes fully assembled and features an aluminum alloy filter holder that is preinstalled with three pairs of plastic filter slots, a configuration that supports three rectangular filters. Each slot is designed to hold a filter installed only along the surface of the filter edges. Contact with the front or rear surfaces of a filter is avoided, especially when graduated filters are used, the effect of which can be adjusted to better adapt to changing lighting conditions or creative demands by sliding them up or down inside a filter slot .

The use of the 100 mm NiSi V6 filter support kit can be easily achieved by first screwing the 82 mm adapter ring included in a lens with 82 mm front filter threads. Magnification rings are included to allow the adapter ring to be used with lenses that have 67mm, 72mm or 77mm front filter threads, while additional magnification rings are available separately for 49mm, 52mm lenses , 55 mm, 58 mm or 62 mm Front filter threads. After placing it on the adapter ring, the filter holder removal and removal lock pin helps provide a reliable connection that allows the bracket to rotate 360 ​​°, which further benefits the use of graduated neutral density and other filters that are improved with various positioning. To further secure the position of an installed filter,

Together, the 82mm adapter ring and the filter holder also accommodate the included NiSi 86mm circular polarizing filter, while allowing the filter edges to be easily grasped for convenient installation or removal. When combined with the filter holder and adapter ring, as well as with an optional magnifying ring, the polarizing filter can be rotated to adjust its effect. In such cases, an external dial on the adapter ring allows independent rotation of the circular polarizer.

Adapter rings for lenses with 86mm or 95mm front filter threads are also available separately. The combination of any of these adapter rings with the filter holder cannot accommodate a 86 mm NiSi circular polarizing filter; however, a polarization effect can be obtained by placing a polarizing filter 2 mm thick and 100 mm wide available separately between a pair of grooves of the filter holder.
The durable aluminum alloy filter holder provides three pairs of filter slots, a configuration that supports up to three filters 100 mm wide and 2 mm thick available separately
Each slot is designed to hold a filter installed only along the surface of the filter edges, avoiding contact with the front or rear surfaces of the filter.
The use of the filter holder can be easily achieved by first screwing the 82 mm adapter ring included in a lens with 82 mm front filter threads
The included magnification rings allow you to use an 82mm adapter ring with lenses that have 67mm, 72mm or 77mm front filter threads
Additional rings are available separately for lenses with 49mm, 52mm, 58mm or 62mm front filter threads
The extraction and extraction locking pin in the filter holder allows a reliable connection to the 82 mm adapter ring, allowing the support to rotate 360 ​​°
The bolted locking pin can be used to prevent any rotation of the filter holder, further ensuring the position of an installed filter
The 82mm adapter ring accommodates the included 86mm NiSi circular polarizing filter and allows you to rotate to adjust its effect
When combined, the filter holder and the 82 mm adapter ring allow for easy installation or removal of the circular polarizer
Additional adapter rings are available separately for lenses with 86mm or 95mm front filter threads
Padded bag included for storage and transport.

19 EUROS DISCOUNT FOR CANARY ISLANDS

•   100 mm filter holder
• Allows the use of 3 rectangular filters with circular polarizer
•   without bullets at 16 mm in fullframe cameras
•   Circular polarizing filter rotates independently
•   Aluminum alloy construction
•   360 ° rotation + locking screw
•   Bag
•   Compatible with 100x100mm or 100x150mm filters