BENRO TRIPOD CARBON VIDEO KIT C373FBS8PRO

Benro C373F Carbon Fiber Single Tube Tripod with S8Pro Fluid Video Head

Benro's C373F carbon fiber single tube tripod features a 75mm bowl and includes a 75mm half-ball adapter. It is paired with the S8Pro fluid video head, which has a 75 mm flat base that connects directly to the half-ball adapter. The head supports loads up to 17.6 lbs and, thanks to the flat base design with a 3/8 "-16 thread underneath, the head can be moved from the tripod directly to the sliders, seals and other support equipment.

The versatile system has a compact design with 2-stage / 3-section single-tube legs and rubber feet and spikes for use on virtually any surface. Each leg of the tripod can be adjusted independently in three positions, allowing you to set it up quickly and efficiently. The carbon fiber design of the tripod ensures better vibration absorption and corrosion resistance of salt water, something to keep in mind if you shoot on the beach near the water. Carbon fiber is also lighter than aluminum.

The S8Pro head offers 7 + 0 counterweight steps and continuous drag of rotation and tilt. There are also independent locks of rotation and tilt. The range of inclination is a wide + 90 / -75 °, and the range of rotation is 360 ° complete. With the head attached, the tripod reaches a maximum height of 64 ". The minimum height is 12.4", a low height that is not common among most tripods. At this point, you can set up the tripod for low-angle shots over time and other applications.

Some parts of the head are made of magnesium and other parts of aluminum. Virtually the entire head, including its knobs, is made of sturdy but light metal. A panoramic bar is included that can be connected to a rosette adapter on the left or right side of the head, for right-handed or left-handed users. A camera plate is included that can be adjusted forward / backward to allow you to find the optimal balance for your camera. A safety lock on the plate ensures that once mounted, the plate will not come off if you move it too far in any direction. Two camera screws (1/4 "-20 and 3/8" -16) are supplied that can be stored under the camera plate on the head itself, in dedicated slots. To place accessories, there is a 3/8 "-16 threaded hole on each side of the head to which you can secure the articulated arms.
S8Pro fluid head
17.6 lb. payload
75 mm flat base with 3/8 "-16 thread
It can also be mounted directly on most sliders, seals and monopods
7 + 0 counterweight steps
Continuous drag and tilt drag
Independent locks of rotation and inclination
Tilt range of + 90 / -75 °
360 ° rotation range
Made of magnesium and aluminum.
Rosette adapters on the left and right side to attach the included panoramic bar
Sliding camera plate with safety lock
1/4 "-20 and 3/8" -16 camera screws included and can be stored in dedicated spaces at the top of the head, under the camera plate
Two 3/8 "-16 threaded holes for accessories
Tripod C373F
75 mm bowl tripod with a 75 mm half ball adapter
Maximum height of 64 "with the S8Pro attached
12.4 "minimum low angle height
Independently adjustable single tube legs in three positions
Rubber feet and spikes
Folding leg locks
Carbon fiber construction