ZHIYUN TRANS MOUNT CRANE 3 LAB FOCUS AND ZOOM COMBO KIT

Zhiyun-Tech TransMount Focus & Zoom Servo Combo Kit for Crane 3-

Lab Crane's 3-Lab gimbal supports up to two engines at the same time. Zhiyun-Tech's TransMount Focus & Zoom Servo Combo Kit includes the TransMount Max servo zoom / focus and slightly lighter TransMount Lite focusing servo. Together, these two engines allow you to control focus and zoom with zero latency. The motors are attached to the bottom of the crane base plate without tools using only the included brackets, rods and thumbscrews. TransMount Max servo zoom / focus driver for Crane 3-Lab & WEEBILL LAB The Zhiyun-Tech TransMount Max zoom / focus servo driver can be used interchangeably for zoom and focus control in the Crane 3-Lab and WEEBILL LAB gimbals. It has a powerful enough engine to control the zoom, while the lightweight TransMount Lite is designed solely for focus control. The 3-Lab crane supports up to two motors at the same time, and it is recommended to use TransMount Max and TransMount

Lite together if both the zoom and the focus control on the crane are required. The WEEBILL, however, is only compatible with one motor, so the TransMount Max is recommended as the only solution, since it can be used interchangeably for both functions. With a toolless design, the TransMount Max is connected to the cardan using only the included thumbscrews. It can be controlled through the steering wheel of the gimbal or the complementary application of the smartphone. attach them to the supplied bracket and to the mounting rod with two thumbscrews, and attach this assembly to the bottom of the cardan base plate with the third thumbscrew. Then connect the servo to the gimbal with the supplied USB cable, and connect the camera to the gimbal with one of the control cables of the camera that the gimbal comes with. The USB cable connection provides zero latency signal transmission. Key features It can be used interchangeably for zoom and focus control Recommended as the zoom solution for the 3-Lab crane, which supports two motors at the same time, and as the only solution for the WEEBILL LAB, which supports only one motor Tool-free design: assembled with the included bracket and mounting rod and attached to the bottom of the gimbal base plate with the supplied thumbscrews It is connected to the cardan through a USB cable and the controls are centered with zero latency.