BENRO Slider Carbon MOVEOVER 8 900MM

Benro MoveOver8B Carbon Fiber slide Control with case (23.6 ")

This carbon fiber slider with Benro MoveOver8B Kit includes an aluminum sliding carriage running on carbon fibre rails with 23.6 "of actual carriage travel, and a soft case. The cart has a flat mounting surface with a 3/8 "-16 threaded mounting stud to mount the flat base fluid base, and has pre-stressed roller bearings for smooth gliding. A built-in friction brake is controlled with a single knob, allowing you to adjust the friction on the slider, or even use it as a brake when the slide control is level.
The slider features 18 mm diameter carbon fibre rails and supports a total payload of up to 17.6 lbs. The slider can be mounted on a tripod or brackets, or can be placed on a level surface. The built-in bubble level allows you to confirm that your slide control is level. Each leg is mounted on the track of the slide control through a rosette and can rotate 360 °, and each foot has approximately 4 "Height adjustment for leveling. You can operate the slider at any angle from 0 to 90 °, and you can even understand less the slide control
Adjustable legs can be moved to 360 ° of rotation. However, they are in their greatest support between 12 and 60 °.
The ends of the track allow you to mount the slide control on the brackets using the slot in the baby pin. Each end of the track features 1/4 "-20 and 3/8 "-16 threaded mounting holes.
The slider can also be mounted directly on a tripod using the 3/8 "-16 or 1/4 "-20 threaded mounting hole on the attached cheese plate.
The cart has four 1/4 "-20 threaded mounting holes for accessories.