SARAMONIC ADAPTER SMARTRIG + DI MICROPHONE / GUITAR
- Lightning output connector
- Two XLR microphone inputs
- Two 6.35mm guitar inputs
- Two 3.5mm microphone inputs
- Mono / Stereo Switch (M / S)
- Rec / Play switch
- + 48V phantom power
- 3.5mm headphone output for monitoring
By buying this product you can collect up to 1 loyalty point. Your cart will total 1 point that can be converted into a voucher of 1.
Saramonic SmartRig + Di, two-channel microphone and guitar interface with Lightning connector for iOS devices
Saramonic SmartRig + Di is a two-channel audio interface that allows you to connect professional microphones or guitars to your iPhone, iPad and iPod touch device. With a Lightning connector output, the interface can be used to record stereo sound or music on your iOS portable device.
The SmartRig + Di provides 48V phantom power for condenser microphones and is equipped with two XLR inputs, two 1/8 "inputs and two 1/4" inputs, and a 1/8 "headphone output for monitoring in real time There are two gain control wheels that facilitate the configuration of levels for each channel separately.
Frequency response 20 Hz to 20 kHz +/- 0.5 dB
Total harmonic distortion (THD) Less than 0.01% at 1 kHz, -30 dBu input
Signal to noise ratio 78 dB @ 1 kHz, -30 dBu input
Sampling frequency 44.1 kHz or 48 kHz
1 1 x XLR microphone input
1 x 1/4 "/ 6.35mm guitar input
1 x 1/8 "/ 3.5mm inlet
Input 2 1 x XLR microphone input
1 x 1/4 "/ 6.35mm guitar input
1 x 1/8 "/ 3.5mm inlet
Output Lightning connector output cable
Headphone output 1/8 "/ 3.5mm jack
Gain + 25 dBu a - ∞
Phantom power 48V power supplies
power requirements 1 alkaline or 9V lithium battery
Dimensions (L x W x H) 4.7 x 1.6 x 1.6 "/ 120.0 x 40.0 x 40.0 mm
Weight 4.6 oz / 130.0 g
Packing information
package weight 0.5 lb
Box dimensions (LxWxH)